NEED FRONT INNER FENDERS (APRONS), 1986 F-250

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

NEED FRONT INNER FENDERS (APRONS), 1986 F-250

Von1970ls5
I need the left and right front plastic inner fenders for my 1986 Ford F-250, I went to my local Dealer
and was told they were discontinued.  One of mine is cracked so I want to replace both.  If anyone knows
where I can buy them it is appreciated.  Dave in Miami Lakes

1970ls5@bellsouth.net
Reply | Threaded
Open this post in threaded view
|

Re: NEED FRONT INNER FENDERS (APRONS), 1986 F-250

grumpin
http://www.lmctruck.com/icatalog/fd/full.aspx?Page=14

These work?
Dane
1986 F250HD SC XLT Lariat 4x4 460 C6-Sold
1992 Bronco XLT 4x4 351W E4OD
1998 GMC Sierra SLE K1500 350 4L60E
Arizona
Reply | Threaded
Open this post in threaded view
|

Re: NEED FRONT INNER FENDERS (APRONS), 1986 F-250

Gary Lewis
Administrator
In reply to this post by Von1970ls5
Dave - They varied a bit through the years and by application, as you can see on the page Underhood/Fender Aprons in the menu.  However, the later you go the more holes in them, so you'd be fine with about any of them and use yours as templates for where to put the holes.
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: NEED FRONT INNER FENDERS (APRONS), 1986 F-250

Von1970ls5
I am not sure if they would work, mine is an 86' and those start 87-96.  I know what you said about the extra holes and that does not bother me.  Sure would help if someone on the site had actually tired these on an older truck.  Thanks for the reply.  Dave


On Monday, September 2, 2019, 11:48:41 AM EDT, Gary Lewis [via Bullnose Enthusiasts] <[hidden email]> wrote:


Dave - They varied a bit through the years and by application, as you can see on the page Underhood/Fender Aprons in the menu.  However, the later you go the more holes in them, so you'd be fine with about any of them and use yours as templates for where to put the holes.
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker in front & 10.25 Spicer/Trutrac in back, & EEC-V MAF/SEFI



If you reply to this email, your message will be added to the discussion below:
http://forum.garysgaragemahal.com/NEED-FRONT-INNER-FENDERS-APRONS-1986-F-250-tp37020p37024.html
To unsubscribe from NEED FRONT INNER FENDERS (APRONS), 1986 F-250, click here.
NAML
Reply | Threaded
Open this post in threaded view
|

Re: NEED FRONT INNER FENDERS (APRONS), 1986 F-250

grumpin
My bad! I saw the rear were for the bullnoses, assumed the front were.
Dane
1986 F250HD SC XLT Lariat 4x4 460 C6-Sold
1992 Bronco XLT 4x4 351W E4OD
1998 GMC Sierra SLE K1500 350 4L60E
Arizona