Bullnose Enthusiasts Forum

Front Brake Dust Shield Gasket

Classic

List

Threaded

7 messages Options

fords4life

Front Brake Dust Shield Gasket

Anyone have any idea where to find the gasket that goes between the dust shield and the spindle? I can't find it to save my life. It's the last piece I need for the front end rebuild. It's part 2B160 in the diagram below.

1986 F-150 SC 2wd 4spd 302EFI Base Model all OEM motor/trans/emissions equipment.

kramttocs

Re: Front Brake Dust Shield Gasket

Administrator

Found a post by ND but doesn't help you (just adding it for reference really):

E2TZ-2B160-B used with dual piston calipers for 1982 and later E250 & F250's over 6,900 lbs. E350 & F350 and 1988 and later F (Super Duty).

Scott
'Camano' 1986 F250 Supercab XLT Lariat 460/C6
'Chanute' 1980 F350 C&C 400/NP 435 - Gin Pole

But there ain't nothin' wrong with the radio

kramttocs

Re: Front Brake Dust Shield Gasket

Administrator

And -A looks to be for vans.
So there's two ways to not invent a lightbulb

Scott
'Camano' 1986 F250 Supercab XLT Lariat 460/C6
'Chanute' 1980 F350 C&C 400/NP 435 - Gin Pole

But there ain't nothin' wrong with the radio

Gary Lewis

Re: Front Brake Dust Shield Gasket

Administrator

In reply to this post by kramttocs

I don't know where to get them, but if you had the part number you might be able to find them by searching. I'll see Numberdummy and raise him one - all the part numbers are now on the site at: Documentation/Driveline/Brakes and then on the Front Brakes, then Dust Shields, and Part Numbers tabs.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Gary Lewis

Re: Front Brake Dust Shield Gasket

Administrator

In reply to this post by kramttocs

kramttocs wrote

And -A looks to be for vans.
So there's two ways to not invent a lightbulb

Yes, Mr Edison. But what is interesting is that the 1980 E-Series vans had a D3 prefix, and you are just playing with the suffix. But wait! There's no entry for 1980 F-Series trucks. So, since the vans and pickups seem to have shared the gaskets at times, did the 1980 F-Series gasket have a D3 prefix?

Gary, AKA "Gary fellow": Profile

fords4life

Re: Front Brake Dust Shield Gasket

Thank you both! Picked up both of them on Ebay for $12 shipped. Just sucks that I won't see them this weekend because the front end is ready to go back together. Oh well, I can still get the suspension and steering back together, just not the brakes. Getting closer to having a roller again.

1986 F-150 SC 2wd 4spd 302EFI Base Model all OEM motor/trans/emissions equipment.

kramttocs

Re: Front Brake Dust Shield Gasket

Administrator

In reply to this post by Gary Lewis

Yeah, I thought it was odd but that's the reference and images that kept coming up for -A.

@fords4life - glad you got what you needed!

Scott
'Camano' 1986 F250 Supercab XLT Lariat 460/C6
'Chanute' 1980 F350 C&C 400/NP 435 - Gin Pole

But there ain't nothin' wrong with the radio