Flare Side truck owners I got a bed question

classic Classic list List threaded Threaded
14 messages Options
Reply | Threaded
Open this post in threaded view
|

Flare Side truck owners I got a bed question

FuzzFace2
I am getting close to fixing the lips on the bed side panels and the bed front panel.

 On the side panels I need to know on the lip in front of the wheel hump how long is this lip, does it go to the end of the bed side panel? A little piece I still have it looks like it did go to the end of the panel?

 How many bolts are in that lip thru the floor?

 I also need to know how far from the end is the first bolt? I don't think it is at the end, thru the side panel & the front panel, as it would be in the way for the lower bolt going thru the side

 On the front panel how many bolts are thru the lip at the floor?

 How far from either end (side panels) is the bolt(s)? Again I don't think at the end as it would be in the way for the lower bolt going thru the side?

 Thanks for any help you can give.
 Dave ----
Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear
http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1
81 F100 style side 300 six/SROD parts truck -RIP
http://cars.grantskingdom1.com/index.php/1981-Ford-F100
Reply | Threaded
Open this post in threaded view
|

Re: Flare Side truck owners I got a bed question

Hound Dog Lew
I can look, measure and take pictures tomorrow.
1983 F150 Flareside 302 AOD 3.55
Reply | Threaded
Open this post in threaded view
|

Re: Flare Side truck owners I got a bed question

FuzzFace2
No rush as I most likely will not be getting to the truck till next weekend.
Besides I am sure I can find other thing to do on the truck.
Thanks
Dave ----
Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear
http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1
81 F100 style side 300 six/SROD parts truck -RIP
http://cars.grantskingdom1.com/index.php/1981-Ford-F100
Reply | Threaded
Open this post in threaded view
|

Re: Flare Side truck owners I got a bed question

Ford F834
Administrator
In reply to this post by FuzzFace2
Dave, if you don't get the pictures and measurements that you need by Tuesday or Wednesday I can look at mine. It is fully disassembled so if you want/need any "apart" views of anything let me know.
SHORT BED 4-DOOR DIESEL: 1986 F350 4x4 under construction-- 7.3 IDIT ZF5+GVOD

STRAIGHT SIX 4X4: 1981 F150 2wd to 4x4-- 300 I6 close ratio diesel T19, hydroboost brakes, Saginaw steering

BIG F: 1995 F-Superduty under construction— converting to 6.9L IDI diesel ZF5+DNE2
Reply | Threaded
Open this post in threaded view
|

Re: Flare Side truck owners I got a bed question

PetesPonies
In reply to this post by FuzzFace2
Exactly to what lip do your refer?
Pete's Ponies
Mustang RUSToration & Performance

1982 F100 Flareside
1983 Bronco

Reply | Threaded
Open this post in threaded view
|

Re: Flare Side truck owners I got a bed question

FuzzFace2
PetesPonies wrote
Exactly to what lip do your refer?
On the side panels the lip the bolts go thru into the wood.
This is 1 of the front lips I have to replace / make.

The other front one I have to replace / make.

The rear lips don't look too bad but need work too.



It is mainly the front lips I need a picture of so I can see how many and where the holes are.
And yes I still need this information.
Dave ----
Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear
http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1
81 F100 style side 300 six/SROD parts truck -RIP
http://cars.grantskingdom1.com/index.php/1981-Ford-F100
Reply | Threaded
Open this post in threaded view
|

Re: Flare Side truck owners I got a bed question

PetesPonies
OK, I'll take a pic tomorrow.
Pete's Ponies
Mustang RUSToration & Performance

1982 F100 Flareside
1983 Bronco

Reply | Threaded
Open this post in threaded view
|

Re: Flare Side truck owners I got a bed question

FuzzFace2
Thanks
I know the lower plates also have a lip I will have to deal with too.
As you can see I don't have much to go by in making the upper side lip that can be seen.

Thanks again
Dave ----
Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear
http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1
81 F100 style side 300 six/SROD parts truck -RIP
http://cars.grantskingdom1.com/index.php/1981-Ford-F100
Reply | Threaded
Open this post in threaded view
|

Re: Flare Side truck owners I got a bed question

PetesPonies
Pics, hope it helps





Pete's Ponies
Mustang RUSToration & Performance

1982 F100 Flareside
1983 Bronco

Reply | Threaded
Open this post in threaded view
|

Re: Flare Side truck owners I got a bed question

FuzzFace2
It does help.

I see 5 bolts & think 1 screw on the left side and 3 bolts on the right?
Is there a screw in the corner on the right side I can see?
I think the 2 of the 5 on the left hole a plate in place on the under side, do you know what this plate is for?

Once I know what that plate is for I may just do 3 bolts on each side as I am not using wood for the floor.
Thanks
Dave ----
Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear
http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1
81 F100 style side 300 six/SROD parts truck -RIP
http://cars.grantskingdom1.com/index.php/1981-Ford-F100
Reply | Threaded
Open this post in threaded view
|

Re: Flare Side truck owners I got a bed question

PetesPonies
The pics are all from  the right side of the bed. The 3 bolts are in front of the wheel well, where as the five with the screw are behind. The two that are close in the behind pic, are that way on the left side as well. So I guess that is normal, not so sure about the screw. I didn' look under for a plate, I'll look.
Pete's Ponies
Mustang RUSToration & Performance

1982 F100 Flareside
1983 Bronco

Reply | Threaded
Open this post in threaded view
|

Re: Flare Side truck owners I got a bed question

FuzzFace2
Ok now I know why that screw is in the picture, it goes into the rear cross brace/sill.

I need a picture of the left front bolts in front of the wheel hump.
I am told there are 5 bolts 2 of witch hold a plate. If you still have that plate can you tell me what it does?
Thanks
Dave ----
Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear
http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1
81 F100 style side 300 six/SROD parts truck -RIP
http://cars.grantskingdom1.com/index.php/1981-Ford-F100
Reply | Threaded
Open this post in threaded view
|

Re: Flare Side truck owners I got a bed question

PetesPonies
OK Ill get a pic. I do think there were more bolts, but I figured they were added at some time  LOL
Pete's Ponies
Mustang RUSToration & Performance

1982 F100 Flareside
1983 Bronco

Reply | Threaded
Open this post in threaded view
|

Re: Flare Side truck owners I got a bed question

PetesPonies
Here's what the underside of my truck looks like in that area. There is no plate, just a bracket support for the fender.

Pete's Ponies
Mustang RUSToration & Performance

1982 F100 Flareside
1983 Bronco