My C6 is dripping trans fluid where the bellhousing meets the transmission. The general consensus is that the front main seal is the culprit and that if I replace the front, I might as well replace the rear.
So, I'm looking for the part numbers for the front and rear main seals for my C6 so that I can order them.
After researching the C6 documents, I'm a little confused.
Are they referred to as the "input shaft" and "output shaft" seals?
Sorry, I missed this. And, I see why you are confused.
Yes, they are input and output shaft.
I'm seeing the output shaft seal as C4AZ 7D011-A. But, I do not see an "input shaft seal" as such. Instead, it looks like C6AZ 7D025-A SEAL (INTERMEDIATE BRAKE DRUM) is the farthest forward seal. So, I am confused as well.
I've never had a C6 apart, so I am no where near an authority on this. We need someone else to weigh in.
Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/soon-to-be ZF5/3.55's & EEC-V MAF/SEFI