Bullnose Enthusiasts Forum › Marketplace › eBay, Craigslist, Facebook, & Kijiji Finds

Blue "A" pillar trim [used]

Classic

List

Threaded

10 messages Options

1986F150Six

Blue "A" pillar trim [used]

Administrator

Quite rare...

https://www.ebay.com/itm/80-86-Ford-F150-Bronco-Blue-A-PILLAR-WINDSHIELD-TRIM-F250-F350-81-82-83-84-85/153510380784?hash=item23bdee84f0:g:FkgAAOSwudFc8ybu

rthenry145

Re: Blue "A" pillar trim [used]

Any one know if these would also fit a F100 (80-82) ?

On Tue, Jun 25, 2019 at 11:09 AM 1986F150Six [via Bullnose Enthusiasts] <[hidden email]> wrote:

Quite rare...

https://www.ebay.com/itm/80-86-Ford-F150-Bronco-Blue-A-PILLAR-WINDSHIELD-TRIM-F250-F350-81-82-83-84-85/153510380784?hash=item23bdee84f0:g:FkgAAOSwudFc8ybu

If you reply to this email, your message will be added to the discussion below:
http://forum.garysgaragemahal.com/Blue-A-pillar-trim-used-tp30282.html

To unsubscribe from eBay & Craigslist Finds, click here.
NAML

'81 Custom F-100 I6, Style Side, A/C

Gary Lewis

Re: Blue "A" pillar trim [used]

Administrator

Yes. The trucks are the same from 1980 through ‘86, and F100 through F350’s.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

1986F150Six

Re: Blue "A" pillar trim [used]

Administrator

I do not have my truck here to compare, but some "A" pillar trim would be for no padded headliner. There is a difference, I believe. The advertisement states that this came from a Lariat model, so I would guess with a padded headliner.

Can anyone verify this?

Rembrant

Re: Blue "A" pillar trim [used]

I can confirm it visually this evening as my interior is blue and I have no headliner at all;).

1994 F150 4x2 Flareside. 5.0 w/MAF, 4R70W, stock.
1984 F150 4X2 Flareside. Mild 302 w/ 5spd. Sold.
1980 F150 4X4 Flareside. 300i6 w/ 5spd. Sold in 2021.
1980 F100 4X2 Flareside. 351w/2bbl w/NP435. Sold in 1995

Gary Lewis

Re: Blue "A" pillar trim [used]

Administrator

I can check the catalog later. Am out and about at the mo

Gary, AKA "Gary fellow": Profile

fords4life

Re: Blue "A" pillar trim [used]

In reply to this post by 1986F150Six

I think you are correct. My '86 has no headliner and there is a screw in the upper curved area on my trim. I'm not seeing the same screw hole on these, but I can't run out and look right at the moment either.

1986 F-150 SC 2wd 4spd 302EFI Base Model all OEM motor/trans/emissions equipment.

Gary Lewis

Re: Blue "A" pillar trim [used]

Administrator

Well, we have a nice page on this: Interior/Interior Trim. And if you look at the illustrations you'll see that the part in question is 03598. Unfortunately the yoyo that created the page hasn't seen fit to include all of the part numbers.

So, here they are, and there is a different one for with and without headliner. Having said that, Big Blue came with a headliner but I've pulled it out and I'm still using the same trim.

Gary, AKA "Gary fellow": Profile

FuzzFace2

Re: Blue "A" pillar trim [used]

Just a WAG but if the trim is for a head liner you would have trim above the doors and across the rear window.
The tab the seller talks about I think is under the door trim and not seen when in place.

Where on the non-head liner trim you only have the "A" pillar trim, no over the door trim so the "A" trim is finished differently.
Dave ----

Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear
http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1
81 F100 style side 300 six/SROD parts truck -RIP
http://cars.grantskingdom1.com/index.php/1981-Ford-F100

Rembrant

Re: Blue "A" pillar trim [used]

FuzzFace2 wrote

Where on the non-head liner trim you only have the "A" pillar trim, no over the door trim so the "A" trim is finished differently.
Dave ----

Yes sir, that is correct. You can see mine below. It fits under the upper windshield trim, but since there is no upper door trim for it to fit under, it has a rounded off edge, and as mentioned above a screw holding it in place.