Bullnose Enthusiasts Forum

Blown 300 Six

Classic

List

Threaded

8 messages Options

Danny G

Blown 300 Six

https://youtu.be/V8BmWSwtlfk

In a jeep

1986 F-150|Standard Cab|4x2|300Six|C6Transmission w/3.08 rear|Name:TBD
2021 Ranger XLT Super Crew

Gary Lewis

Re: Blown 300 Six

Administrator

That is one strange looking carb. I've seen pics of them, but have never been around one. Looks like a standard Holley/Motorcraft accelerator pump on the side, but don't recognize anything else - except the backfire.

But when he revs it the thing sounds healthy.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

85lebaront2

Re: Blown 300 Six

Administrator

I've got one of those 3.8L SC blowers.

Bill AKA "LOBO" Profile

"Getting old is inevitable, growing up is optional" Darth Vader 1986 F350 460 converted to MAF/SEFI, E4OD 12X3 1/2 rear brakes, traction loc 3:55 gear, 160 amp 3G alternator Wife's 2011 Flex Limited Daily Driver 2009 Flex Limited with factory tow package Project car 1986 Chrysler LeBaron convertible 2.2L Turbo II, modified A413

Gary Lewis

Re: Blown 300 Six

Administrator

What's it off of? The SuperCoupe?

Gary, AKA "Gary fellow": Profile

Frank Wyatt

Re: Blown 300 Six

Those Predator carbs will flow a lot of cfm but can be tricky to tune but flow like no other once they are dialed in. On a 300 though, I believe it's too much carb for it. If memory serves me right, the original Bigfoot used two of those on it's highly modified 460. I have been around one of those carbs and that one leaked like spaghetti strainer and it was on a 460. It wasn't stock by any means but not as modifed as far as Bigfoot's 460 and though it was only running a single Predator it was still a little big for it.

1981 F 150 Custom 300 ci with a fully rebuilt 1968 240 head Carter YFA T-18 3.25 9" rear 2WD
dual gas tanks
1990 Lincoln Town Car 5.0 AOD
Home town Mc Kenzie, TN

Rembrant

Re: Blown 300 Six

In reply to this post by Danny G

Cool build. I like the sound of it.

1994 F150 4x2 Flareside. 5.0 w/MAF, 4R70W, stock.
1984 F150 4X2 Flareside. Mild 302 w/ 5spd. Sold.
1980 F150 4X4 Flareside. 300i6 w/ 5spd. Sold in 2021.
1980 F100 4X2 Flareside. 351w/2bbl w/NP435. Sold in 1995

Angelo Voltura

Re: Blown 300 Six

In reply to this post by Frank Wyatt

Predator carbs were different in variable cfm and I think were capable up to 900cfm. They pulled only the amount of air needed for the throttle position it was at.

1978 F150 351W
1979 F150 "410M"
1979 F100 302
1979 F250 400
1987 F150 300
1990 F150 302
1991 F150 300
1995 F150 (1985 clip swapped) 300
1997 F250 351W

85lebaront2

Re: Blown 300 Six

Administrator

In reply to this post by Gary Lewis

Yes, I had the complete engine but in moving stuff to make the city of Newport News happy (nothing could be seen unless you climbed a 6' privacy fence or pried a gate open) it got misplaced at Pete's. I was going to stick it in a 1996 with a bad 3.8L NA engine.

Bill AKA "LOBO" Profile