Bullnose Enthusiasts Forum

Blower motor and fan? which one?

Classic

List

Threaded

12 messages Options

Bulletproof250

Blower motor and fan? which one?

I've now ordered 2, blower motor, and fan wheel and neither fits. they both end up with the larger wheel and I have a smaller wheel, and a slightly different motor/mounting flange. My truck does not have AC, and I can seem to find the right PN for this unit. Please help, it's winter here in the Northeast

Thanks,
Alex

1984 F-250 Std Cab (a.k.a. Harrison), Dana 60 Rear, Dana 44HD Front, Ratio 3.54:1, 351W, 2bbl Motorcraft 2150, 4WD NP208 Transfer Case, 4-Speed Warner T-18..
Med Desert Tan Metallic ("Tan? ..not brown?" <= from CT DMV worker upon registering)

-Teach your Kids to Fish, Hunt, or get them into Cars, and they'll never have the time or money for drugs.

Angelo Voltura

Re: Blower motor and fan? which one?

What year is the truck? Odds are you got one build before 03/1982, in which case they were different and likely smaller.

I know the one in my 95 fits my dads 85 so you might try that.

Try out E4TZ-18A484-C. If that doesn't work, E2TZ-18A484-A.

Those are numbers for the standard output heater.

1978 F150 351W
1979 F150 "410M"
1979 F100 302
1979 F250 400
1987 F150 300
1990 F150 302
1991 F150 300
1995 F150 (1985 clip swapped) 300
1997 F250 351W

Frank Wyatt

Re: Blower motor and fan? which one?

In reply to this post by Bulletproof250

Also, there were two different styles of non AC trucks. There was one style that was refered to as Hi-Lo Ventilation or some such which uses the same heater core and fan as the AC equiped trucks, and the style that my truck has that is unique and does not share any components with the AC equiped trucks.

1981 F 150 Custom 300 ci with a fully rebuilt 1968 240 head Carter YFA T-18 3.25 9" rear 2WD
dual gas tanks
1990 Lincoln Town Car 5.0 AOD
Home town Mc Kenzie, TN

Gary Lewis

Re: Blower motor and fan? which one?

Administrator

In reply to this post by Bulletproof250

Do you know what the part numbers are for the items you ordered? The numbers from our page on Documentation/HVAC/HVAC Systems are here:

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Gary Lewis

Re: Blower motor and fan? which one?

Administrator

In reply to this post by Frank Wyatt

Frank Wyatt wrote

Also, there were two different styles of non AC trucks. There was one style that was refered to as Hi-Lo Ventilation or some such which uses the same heater core and fan as the AC equiped trucks, and the style that my truck has that is unique and does not share any components with the AC equiped trucks.

Yes. And the numbers I posted, above, are just for the base heaters.

The Hi-Lo systems had air vents in the dash, just like the A/C trucks, but didn't have the compressor nor A/C controls in the dash.

So if Alex's truck has vents in the dash those are the wrong #'s.

Gary, AKA "Gary fellow": Profile

salans7

Re: Blower motor and fan? which one?

What about the Hi-Output heaters, did they have a different blower motor?

Gary Lewis

Re: Blower motor and fan? which one?

Administrator

Good question, so I looked again. And I see two different cores but only the one blower motor for "heater".

Gary, AKA "Gary fellow": Profile

salans7

Re: Blower motor and fan? which one?

Good to know.

1986F150Six

Re: Blower motor and fan? which one?

Administrator

In reply to this post by Gary Lewis

Gary Lewis wrote

Do you know what the part numbers are for the items you ordered? The numbers from our page on Documentation/HVAC/HVAC Systems are here:

https://www.ebay.com/itm/Ford-OEM-Blower-Motor-Assembly-NOS-E3PZ-18527-A-1980-1981-F150-F250-F350/231665653122?hash=item35f0595582:g:lb0AAOSwgQ9V3IlB

https://www.ebay.com/itm/Ford-Motor-Co-D-C-Motor-E2TZ18527A/263176813317?epid=1039763798&hash=item3d468f7b05:g:ZSQAAOSwOsBZptHX

https://sunparts.ecrater.com/p/20983035/genuine-ford-wheel-heater-blower

Bulletproof250

Re: Blower motor and fan? which one?

I love this forum!

Thanks for all of the suggestions. I'll look into the details, and the associated part numbers and be sure to tell you how I make out.

Gary Lewis

Re: Blower motor and fan? which one?

Administrator

Good luck! And keep us posted. We are here to help.

Gary, AKA "Gary fellow": Profile

Steam Power

Re: Blower motor and fan? which one?

In reply to this post by Bulletproof250

So did you ever find the right parts?

I also have a non-AC truck with no vents, and a heater blower that sounds like a freight train trying to outrun a tornado. So this thread really caught my interest.

1985 F-150 4x4
standard cab, long bed, 300i6, manual 3 speed