Bullnose Enthusiasts Forum

Anyone know p/n for front wheel bearings and seal. Dana 44HD

Classic

List

Threaded

4 messages Options

CountryBumkin

Anyone know p/n for front wheel bearings and seal. Dana 44HD

This post was updated on .

I need to replace front wheel bearings and wheel seal on my 82 F250 4x4 with Dana 44HD front axle.

Looking through some on-line parts stores, there are a lot of choices but I don't trust the brands I haven't heard of before.

I did find a Timken catalog online that shows the bearing sets I need are:

Front Inner p/n "SET37" (a LM603011 cup and LM603049 cone)
Front Outer p/n "SET45" (a LM501310 cup and LM501349 cone)
Seal 4250.

This sounds correct. If anyone has other info, please post, otherwise I'll order this.

Thanks

-Mike
1982 F250 4x4 XLT Lariat, 460cid, 9.5:1, TFS 290 Street Port heads, Crane Hyd. Roller cam (278/286 adv.,216/224 @.050, .560"/.586" lift), Edelbrock Performer 460 intake, MSD Atomic TBI fuel injection, MSD 6AL ignition, MSD Billet distrib., Hedman headers, NOS Cheater system, 4" Suspension lift, 3" body lift, 4.56 gearing, 17x12.5Rx37 tires MT Baja ATZ-P3.

Gary Lewis

Re: Anyone know p/n for front wheel bearings and seal. Dana 44HD

Administrator

I don't know Timken or other part numbers, but perhaps the Ford #'s will help.

First, you have to find your axle's parts list number, and I make that out to be #14.

And here is #14's list of parts. (Don't ask what 8A 1202 means. I don't know.)

I'll see if I can't get this put up on the website.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Gary Lewis

Re: Anyone know p/n for front wheel bearings and seal. Dana 44HD

Administrator

This post was updated on .

Ok, the info is up on Driveline/4WD Front Hubs & Rotors.

Gary, AKA "Gary fellow": Profile

CountryBumkin

Re: Anyone know p/n for front wheel bearings and seal. Dana 44HD

Thanks!