351 W Build Gone Wild

classic Classic list List threaded Threaded
128 messages Options
1234567
Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

Gary Lewis
Administrator
It was, indeed, a productive day.  I'd never have gotten the top off Huck by myself, nor the microfiche viewers put away up high.  Thanks!

That AVS was a mess, for sure.  And unless we can find the two pieces, the secondary tension spring and the choke link, it isn't usable yet.  But maybe Edelbrock can help us.

As for that kit, it was awful.  I've never seen inlet seats that have the wrong threads on them.  But those did.  And the hole in the accelerator pump was too small to take the S link.  However, we got lucky as there were new inlet seats in the carb cabinet, and a drill bit opened up the hole nicely.

What is the brand of that kit?  I don't want to use one of them again.  
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

85lebaront2
Administrator
I will bet it was probably "Made in China" but it could be Edelbrock made some changes to them, maybe to Metric threads?
Bill AKA "LOBO" Profile

"Getting old is inevitable, growing up is optional" Darth Vader 1986 F350 460 converted to MAF/SEFI, E4OD 12X3 1/2 rear brakes, traction loc 3:55 gear, 160 amp 3G alternator Wife's 2011 Flex Limited Daily Driver 2009 Flex Limited with factory tow package Project car 1986 Chrysler LeBaron convertible 2.2L Turbo II, modified A413

Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

Gary Lewis
Administrator
No, there was nothing wrong with the carb.  Standard inlet seats worked fine.  It was the seats from the kit Brandon bought that were wrong.  Instead of 5/16-24 threads they had X-1.0 metric threads.  Close, but no cigar.
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

Bruno2
Bill do you have any AVS parts laying around that I may need to get this unit working?
Whitey: 1996 F 250 XL CCLB 4X4 7.3 DI ZF5 (The Work Horse) Lots of power mods
Whitey Jr: AKA Jr 1982 F 150 CCLB 4X4 351W C6 (Jr Work Horse) respectable power, but not over the top
The Bronco: 1987 Bronco XLT 351W C6 (needs work) Lots of off road mods and plenty of power mods
The Dodge: 2006 Ram 2500 CCSB 4X4 5.9 HO Cummins (The reliable ride that cant keep an AC in itself) (5th AC go around almost complete)
Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

ArdWrknTrk
Administrator
In reply to this post by Gary Lewis
I think what Bill is saying is that Edelbrock may use 8x1 metric threads on current production.

IDK if it will help, but I can take some measurements and photos of my carb for comparison.
 Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.
Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

Gary Lewis
Administrator
Ahhh!  Maybe that is what he is saying.  Do you have the old inlet seats?  If you measured the threads on those it might answer the question.

And, yours is an 1805?  Perhaps pics of the secondary tension spring, which I am just remembering but can't find pics of?  And, of the link between the choke shaft and the choke butterfly?
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

ArdWrknTrk
Administrator
I have an 1826, like it says in my sig.

No. I'm sorry, I didn't save any of the garbage I pulled out of this carb when I rebuilt it.

There may be some useful pic farther up this thread when I had it apart (September??)
 Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.
Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

ArdWrknTrk
Administrator








 Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.
Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

Gary Lewis
Administrator
Jim - Thanks.  Your first pic is ever so close.  We need to see the whole of the link that goes past the air cleaner stud and operates the choke as one that we have doesn't seem to fit and the other isn't long enough.

Also, we need to see the spring that's on the backside of the divider there that the Torx-head clamp screw and the slotted adjuster go through.  IIRC, that spring wraps around the secondary air valve shaft and provides the tension that determines when the air valve opens.  You put a screwdriver in the slot, loosen the Torx-head screw, and turn the slotted adjuster for more or less tension.


Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

ArdWrknTrk
Administrator
Sorry.
I thought you wanted the spring that's wrapped around the secondary shaft at the lower rear of the carb.

I'm trudging around in the slush now but will get other pics when I have time and place to pull the air cleaner again.
 Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.
Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

Gary Lewis
Administrator
Thanks.  Really appreciate it.  
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

ArdWrknTrk
Administrator
I suppose I should post them in the dedicated thread?

Hopefully I can finish what I'm doing before nightfall.
 Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.
Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

Gary Lewis
Administrator
That would probably be best.  But wherever works.
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

Bruno2
In reply to this post by Bruno2
I may have forgotten to tell you thanks for the sector box and bolts as well Gary.
Whitey: 1996 F 250 XL CCLB 4X4 7.3 DI ZF5 (The Work Horse) Lots of power mods
Whitey Jr: AKA Jr 1982 F 150 CCLB 4X4 351W C6 (Jr Work Horse) respectable power, but not over the top
The Bronco: 1987 Bronco XLT 351W C6 (needs work) Lots of off road mods and plenty of power mods
The Dodge: 2006 Ram 2500 CCSB 4X4 5.9 HO Cummins (The reliable ride that cant keep an AC in itself) (5th AC go around almost complete)
Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

Gary Lewis
Administrator
I'm sure you did.  And thanks to you for the help with Huck and the microfiche viewers.  It was a productive day - except we didn't get the carb done.
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

Bruno2
Sounds like the carb is about to come together.

I am really curious to see if the comment in the book about the electric choke being uninstallable has any merit. Sure looked false from I was seeing. However, I wonder if we are going to have linkage issues? IOW, will the choke linkage on the 1406 parts carb not be the correct length???
Whitey: 1996 F 250 XL CCLB 4X4 7.3 DI ZF5 (The Work Horse) Lots of power mods
Whitey Jr: AKA Jr 1982 F 150 CCLB 4X4 351W C6 (Jr Work Horse) respectable power, but not over the top
The Bronco: 1987 Bronco XLT 351W C6 (needs work) Lots of off road mods and plenty of power mods
The Dodge: 2006 Ram 2500 CCSB 4X4 5.9 HO Cummins (The reliable ride that cant keep an AC in itself) (5th AC go around almost complete)
Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

Bruno2
I checked my gasket supplies while I was at the shop measuring the wheelbase for the fuel tanks. I am using some certain specific gaskets that are keeping me from buying a master gasket set. I need the 0.039 Thickness head gaskets for the build. Also, I like the Fel Pro one piece oil pan gasket. I cant get a master set with those in it. I had some left over from other projects as well as some of the new parts came with their own.

All I need is the rear main seal, intake set and a timing cover gasket. I ordered those from Rockauto today for like $21 total after shipping. As soon as they arrive I can start building the motor.
Whitey: 1996 F 250 XL CCLB 4X4 7.3 DI ZF5 (The Work Horse) Lots of power mods
Whitey Jr: AKA Jr 1982 F 150 CCLB 4X4 351W C6 (Jr Work Horse) respectable power, but not over the top
The Bronco: 1987 Bronco XLT 351W C6 (needs work) Lots of off road mods and plenty of power mods
The Dodge: 2006 Ram 2500 CCSB 4X4 5.9 HO Cummins (The reliable ride that cant keep an AC in itself) (5th AC go around almost complete)
Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

Gary Lewis
Administrator
That's basically what I've run into, having to piece things together to get the gaskets I want.
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

Bruno2
Gaskets are here!
Whitey: 1996 F 250 XL CCLB 4X4 7.3 DI ZF5 (The Work Horse) Lots of power mods
Whitey Jr: AKA Jr 1982 F 150 CCLB 4X4 351W C6 (Jr Work Horse) respectable power, but not over the top
The Bronco: 1987 Bronco XLT 351W C6 (needs work) Lots of off road mods and plenty of power mods
The Dodge: 2006 Ram 2500 CCSB 4X4 5.9 HO Cummins (The reliable ride that cant keep an AC in itself) (5th AC go around almost complete)
Reply | Threaded
Open this post in threaded view
|

Re: 351 W Build Gone Wild

Gary Lewis
Administrator
So you are building an engine on Saturday?  
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

1234567