Bullnose Enthusiasts Forum › Projects

1984 Bronco XLT Place Holder

Classic

List

Threaded

4 messages Options

Danny G

1984 Bronco XLT Place Holder

This post was updated on .

CONTENTS DELETED

The author has deleted this message.

1986 F-150|Standard Cab|4x2|300Six|C6Transmission w/3.08 rear|Name:TBD
2021 Ranger XLT Super Crew

FuzzFace2

Re: 1984 Bronco XLT Place Holder

Truck is going to stop really good with

New Drums FL,FR
New Rotors and pads FL, FR

Sounds like a good plan on the brakes as I did the same thing to my truck as part of the rebuild.
At first I used the booster & master from the parts truck, mine did not have power brakes.
Once installed I found both bad and might have been the reason the parts truck was rolled on its roof?

How are the Ebrake cables?
At the wheels 1 of mine was broken and the other not hooked to anything so they were replaced.
Front cables on both trucks were good so reused the best.
Dave ----

Dave G.
81 F100 flare side 300 six / AA OD / NP435 / 2.75 gear
http://cars.grantskingdom1.com/index.php/1980-Ford-F100?page=1
81 F100 style side 300 six/SROD parts truck -RIP
http://cars.grantskingdom1.com/index.php/1981-Ford-F100

ArdWrknTrk

Re: 1984 Bronco XLT Place Holder

Administrator

The parking brake adjuster/equalizer beneath the driver commonly gets destroyed (up here in rust country)

You might check that the threads are good and the crossbar sockets are solid.

Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with a Holley 80508 and Performer intake.
Too much other stuff to mention.

Sac79

Re: 1984 Bronco XLT Place Holder

In reply to this post by Danny G

LMC has a seat foam rebuild kit...

Rob

Eddy Myrtle '84 F150 300-6, Offenhauser C series intake, Edelbrock 1404(500cfm manual choke), EFI exhaust manifold, HEI dizzy, custom Painless harness, NP 435, NP 208, D44, 8.8"/3.08, 1.5" leveling coils, 265/75/16 tires.
Toyopet (Daily driver) '86 Toyota Pickup